HPE ProLiant XL645d User Manual page 14

System maintenance switch descriptions
Position Default
1
S1 Off
S2 Off
S3 Off
S4 Off
1
S5 Off
1, 2, 3
S6 Off
S7 Off
S8 —
S9 —
S10 —
S11 —
S12 —
1
To access the redundant ROM, set S1, S5, and S6 to On.
2
When the system maintenance switch position 6 is set to the On position, the system is prepared to restore all configuration settings to
their manufacturing defaults.
3
When the system maintenance switch position 6 is set to the On position and Secure Boot is enabled, some configurations cannot be
restored. For more information, see Secure Boot.
DIMM slot locations
DIMM slots are numbered sequentially (1 through 8) for each processor. The supported AMP modes use the letter
assignments for population guidelines.
The arrow indicates the front of the server.
Function
Off = iLO 5 security is enabled.
On = iLO 5 security is disabled.
Reserved
Reserved
Reserved
Off = Power-on password is enabled.
On = Power-on password is disabled.
Off = No function
On = Restore default manufacturing settings
Reserved
Reserved
Reserved
Reserved
Reserved
Reserved
14
Component identification