Table of Contents
Advertisement
Installing the operating system with Intelligent Provisioning
Procedure
1. Connect the Ethernet cable between the network connector on the server and a network jack.
2. Press the Power On/Standby button.
3. During server POST, press F10.
4. Complete the initial Preferences and Registration portion of Intelligent Provisioning.
5. At the Start screen, click Configure and Install.
6. To finish the installation, follow the onscreen prompts. An Internet connection is required to update the firmware and
systems software.
POST screen options
When the server is powered on, the POST screen is displayed. The following options are displayed:
•
System Utilities (F9)
Use this option to configure the system BIOS.
•
Intelligent Provisioning (F10)
Use this option to deploy an operating system or configure storage.
•
Boot menu (F11)
Use this option to make a one-time boot selection.
•
Network boot (F12)
Use this option to boot the server from the network.
Registering the server
To experience quicker service and more efficient support, register the product at the Hewlett Packard Enterprise
Product Registration website.
50
Setup
Advertisement
Table of Contents
