Table of Contents
Advertisement
Procedure
1. Power down the server.
2. Disconnect all peripheral cables from the server.
3. Install the GPU tray into the chassis.
Depending on the chassis configuration, your GPU tray might look different.
The image shows installing a right GPU tray. The steps for removing the left GPU tray and the right GPU tray are the
same.
4. Connect all peripheral cables to the server.
5. Power up the server.
The installation is complete.
SXM4 GPU options
The SXM4 GPU tray has four x16 PCIe 4.0 slots.
The SXM4 GPU tray needs four 12 V power supplies and two 54 V power supplies to work.
Each PCIe slot on this SXM4 GPU PCA is capable of supporting up to 500 W per GPU.
Installing an SXM4 GPU
The SXM4 GPUs come pre-installed in the SXM4 GPU tray. Customer installation of the SXM4 GPU is not supported.
PCIe GPU options
The PCIe GPU tray has four x16 PCIe 4.0 slots. Each double-wide PCIe slot is capable of supporting up to 300 W per GPU.
The PCIe GPU tray has eight single-wide x16 PCIe 4.0 slots. Each single-wide PCIe slot is capable of supporting up to 150
W per GPU.
The brown GPU slots support single-width and double-width PCIe GPUs while the gray slots support only single-width
GPUs.
The PCIe GPU tray needs four 12 V power supplies to work.
Hardware options installation
67
Advertisement
Table of Contents
