Table of Contents
Advertisement
The DIMM slots are structured to ensure proper installation. If you try to insert a DIMM but it does not fit easily
into the slot, you might have positioned it incorrectly. Reverse the orientation of the DIMM and insert it again.
9.
Install the air baffle.
10. Install the system board module access panel.
11. Install the system board module into the chassis.
12. Connect all peripheral cables to the server.
13. Power up the server.
More information
Remove the system board module from the chassis
Remove the system board module access panel
Install the system board module into the chassis
Install the system board module access panel
Remove the air baffle
Install the air baffle
Riser and riser cage options
Supported PCIe form factors
A system board module has two x16 PCIe risers that support one low-profile PCIe card each.
Hardware options installation
61
Advertisement
Table of Contents
