Table of Contents
Advertisement
Item
Component
3
Do not remove LED
4
Drive status LED
5
Adapter ejection release latch and
handle
SUV cable connectors
CAUTION: Before disconnecting the SUV cable from the connector, always squeeze the release buttons on the
sides of the connector. Failure to do so can result in damage to the equipment.
Description
•
Off—OK to remove the drive. Removing the drive does not cause a
logical drive to fail.
•
Solid white—Do not remove the drive. Removing the drive causes one
or more of the logical drives to fail.
•
Off—The drive is not configured by a RAID controller or a spare drive.
•
Solid green—The drive is a member of one or more logical drives.
•
Flashing green (4 Hz)—The drive is operating normally and has
activity.
•
Flashing green (1 Hz)—The drive is rebuilding, erasing, or performing a
RAID migration, stripe size migration, capacity expansion, logical drive
extension, or spare activation.
•
Flashing amber/green (1 Hz)—The drive is a member of one or more
logical drives that predicts the drive will fail.
•
Solid amber—The drive has failed.
•
Flashing amber (1 Hz)—The drive is not configured and predicts the
drive will fail.
Removes the SFF flash adapter when released.
96
Component identification
Advertisement
Table of Contents
