Usb Device Not Recognized, An Error Message Is Displayed, Or The Device Does Not Power On When Connected To An Suv Cable - HPE ProLiant Gen10 Troubleshooting Manual

Errors, retries, timeouts, and unwarranted drive failures occur when using an older Mini-SAS cable.
Cause
The Mini-SAS cable might be reaching its life expectancy.
Action
The Mini-SAS connector life expectancy is 250 connect/disconnect cycles (for external, internal, and cable
Mini-SAS connectors). If using an older cable that could be near the life expectancy, replace the Mini-SAS
cable.
USB device not recognized, an error message is displayed, or the device does
not power on when connected to an SUV cable
Symptom
• The USB device is not recognized when connected to an SUV cable.
• An error message is displayed.
• The device does not power on when connected to an SUV cable.
Cause
The USB connectors on the SUV cable do not support devices that require a power source greater than
500mA.
Action
Remove the USB device and do one of the following:
• Attach a USB device that requires a power source less than 500mA.
• Attach an externally powered USB hub to the SUV cable and connect the USB device to the hub.
USB device not recognized, an error message is displayed, or the device does not power on when connected
to an SUV cable 99