Sub-Function 08 (0X08) Set Type Code - ICP DAS USA tM-TH8 User Manual

tM-TH8

3.6.6 Sub-function 08 (0x08) Set type code

This sub-function code is used to set the type code of a module.
Request
00 Address
01 Function code
02 Sub function code 1 Byte
03 Reserved
04 Channel
05 Type code
Response
00 Address
01 Function code
02 Sub function code 1 Byte
03 Type code
Error Response
00 Address
01 Function code
02 Exception code
122 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
1 Byte 1 to 247
1 Byte 0x46
0x08
1 Byte 0x00
1 Byte 0x00 ~ 0x07 for tM-TH8
1 Byte Type code, see Section 1.10 for
details.
1 Byte 1 to 247
1 Byte 0x46
0x08
1 Byte 0: OK
others: error
1 Byte 1 to 247
1 Byte 0xC6
1 Byte 03: type code out of range, channel
out of range, reserved bytes
should be filled with zero,
incorrect number of bytes
received