1.1 More Information
For details of INIT mode operation, please refer to
Section A.1 INIT Mode.
For details of module watchdog and host watchdog,
please refer to Section A.2 Dual Watchdog Operation.
For details of ESD protection and grounding, please
refer to Section A.3 Frame Ground.
There is a way to check whether the module is reset,
please refer to Section A.4 Reset Status for details.
A brief introduction to thermistor is described in
Section A.5 Thermistor.
The module tM-TH8 can be used in resistance
measurement. Please refer to Section A.6 Resistance
Measurement for details,
tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
7