Aa5 - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.7 $AA5

Description:
Reads the reset status of a module.
Syntax:
$AA5[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be read (00 to FF)
5 Command to read the module reset status
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
S Reset status of the module
1: This is the first time the command has been
sent since the module was powered on.
0: This is not the first time the command has
been sent since the module was powered on,
which denotes that there has been no module
reset since the last $AA5 command was sent.
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
46 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AAS[CHKSUM](CR)