ICP DAS USA tM-TH8 User Manual page 36

tM-TH8
2.2 #AA
Description:
Reads the data from all analog input channels.
Syntax:
#AA[CHKSUM](CR)
# Delimiter character
AA Address of the module to be read (00 to FF)
Response:
Valid Command:
Invalid Command:
> Delimiter character for a valid command
? Delimiter character for an invalid command
(Data) Data from all analog input channels, see Section
1.10 for the data format. For the tM-TH8, data
from disabled channels is filled with space
characters.
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
36 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
>(Data)[CHKSUM](CR)
?AA[CHKSUM](CR)