ICP DAS USA tM-TH8 User Manual page 41

tM-TH8
Examples:
Command: $010
Performs a span calibration on module 01 and returns
a valid response.
Command: $020
Performs a span calibration on module 02 and returns
a valid response.
Command: $030
Performs a span calibration on module 03. An
invalid command is returned because the "enable
calibration" command was not sent in advance.
Related Commands:
Section 2.5 $AA1, Section 2.21 ~AAEV
Related Topics:
Section 1.9 Calibration
Notes:
The "enable calibration" command, ~AAEV, must be sent
before this command is used, see Section 1.9 for details.
tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
Response: !01
Response: !02
Response: ?03
41