Aa6 - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.9 $AA6

Description:
Reads the enabled/disabled status of each channel.
Syntax:
$AA6[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be read (00 to FF)
6 Command to read the channel status
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
VV A two-digit hexadecimal value, where bit 0
corresponds to channel 0, bit 1 corresponds to
channel 1, etc. When the bit is 1, it denotes that
the channel is enabled, and 0 denotes that the
channel is disabled.
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
50 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AAVV[CHKSUM](CR)