Aa2 - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.37 ~AA2

Description:
Reads the host watchdog timeout value of a module.
Syntax:
~AA2[CHKSUM](CR)
~ Delimiter character
AA Address of the module to be read (00 to FF)
2 Command to read the host watchdog timeout
value
Response:
Valid command :
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
E 1: the host watchdog is enabled
0: the host watchdog is disabled
VV Two hexadecimal digits to represent the timeout
value in tenths of a second, for example, 01
denotes 0.1 seconds and FF denotes 25.5
seconds.
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
104 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AAEVV[CHKSUM](CR)