Aaf - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.13 $AAF

Description:
Reads the firmware version of a module.
Syntax:
$AAF[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be read (00 to FF)
F Command to read the firmware version
Response:
Valid command:
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
(Data) Firmware version string of the module
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
Examples:
Command: $01F
Reads the firmware version of module 01, and shows
that it is version A2.0.
Command: $02F
Reads the firmware version of module 02, and shows
that it is version B1.1.
58 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA(Data)[CHKSUM](CR)
Response: !01A2.0
Response: !02B1.1