Aard - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.24 ~AARD

Description:
Reads the response delay time value of a module.
Syntax:
~AARD[CHKSUM](CR)
~ Delimiter character
AA Address of the module to be read (00 to FF)
RD Command to read the response delay time value
Response:
Valid command :
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
VV Two hexadecimal digits to represent the
response delay time value in milli-second, for
example, 01 denotes 1ms and 1E denotes 30ms.
The max allowable value is 30 (1Eh).
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
78 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AAVV[CHKSUM](CR)