Aadt - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.20 ~AADT

Description:
Sets the temperature scale of a module to Celsius or
Fahrenheit.
Syntax:
~AADT[CHKSUM](CR)
~ Delimiter character
AA Address of the module to be set (00 to FF)
D Command to set the temperature scale
T C: set the temperature scale to Celsius.
F: set the temperature scale to Fahrenheit.
Response:
Valid Command:
Invalid Command:
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
70 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA[CHKSUM](CR)
?AA[CHKSUM](CR)