Aa2 - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.6 $AA2

Description:
Reads the module configuration.
Syntax:
$AA2[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be read (00 to FF)
2 Command to read the module configuration
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
TT Type code of the module, see Section 1.10 for
details.
CC Baud Rate code of the module, see Section 1.10
for details.
FF Data format, checksum settings and filter
settings of the module, see Section 1.10 for
details.
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
44 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AATTCCFF[CHKSUM](CR)