Set Up The Zt-2510 Module; Introduction Of Configurations - ICP DAS USA ZT-2510 Series User Manual

4

Set up the ZT-2510 module

4.1 Introduction of configurations

A.
Pan ID
"Pan ID" is the group identity of a ZigBee network. The "Pan ID" must
be the same if they are in the same ZigBee network. (Valid values range
from 0x0000 to 0x3FFF)
B.
Node ID
"Node ID" is the identity of the ZigBee module. The "Node ID" must be
unique if it is in the same ZigBee network as other ZigBee module. (Valid
values range from 0x0001 to 0xFFF7 for a ZigBee Router, but is fixed to
0x0000 for a ZigBee Coordinator)
C.
RF Channel
"RF Channel" indicates the radio frequency channel. The "RF Channel"
must be set to the same channel if the module is in the same ZigBee
network as other ZigBee modules.
RF channel
Frequency(MHz)
In addition, the RF channels 0x04, 0x09, 0x0E and 0x0F are recommended
※
because they are not covered with the frequency of Wi-Fi.
2400 00 01 02 03
MHz
ICP DAS, ZT-2510 User Manual, Version 2.0
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.
0x00 0x01
2405 2410
802.11b/g
Channel 1
.11b/g
Channel 1
04 05 06 07 08
...... 0x0F
...... 2480
802.11b/g
Channel 6
.11b/g
Channel 1
09 0A 0B 0C 0D
802.11b/g Channel (North America)
802.15.4 Channel
Page 10
802.11b/g
Channel 11
.11b/g
Channel 1
0E 0F
2485
MHz