Aasxtttc(Data) - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.33 @AASxTttC(data)

Description:
Sets the Steinhart coefficient of a user-defined type.
Syntax:
@AASxTttC(data)[CHKSUM](CR)
@ Delimiter character
AA Address of the module to be set (00 to FF)
S Command to set the Steinhart coefficient
x A: sets Steinhart coefficient A
B: sets Steinhart coefficient B
C: sets Steinhart coefficient C
Ttt tt represents the type code of the user-defined
type to set the Steinhart coefficient.
C(Data) The (Data) is eight hexadecimal digits in IEEE-
754 format to represent the Steinhart coefficient.
See Section 1.11 for details.
Response:
Valid command:
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command or
invalid type code
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA[CHKSUM](CR)
97