Aa3Evv - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.38 ~AA3EVV

Description:
Enables/disables the host watchdog and sets the host
watchdog timeout value of a module.
Syntax:
~AA3EVV[CHKSUM](CR)
~ Delimiter character
AA Address of the module to be set (00 to FF)
3 Command to set the host watchdog
E 1: enable the host watchdog
0: disable the host watchdog
VV Two hexadecimal digits to represent the timeout
value in tenths of a second, for example, 01
denotes 0.1 seconds and FF denotes 25.5
seconds.
Response:
Valid command:
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
106 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA[CHKSUM](CR)