Aa5Vv - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.8 $AA5VV

Description:
Specifies the channels to be enabled.
Syntax:
$AA5VV[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be set (00 to FF)
5 Command to set the channels to enabled
VV A two-digit hexadecimal value, where bit 0
corresponds to channel 0, bit 1 corresponds to
channel 1, etc. When the bit is 1, it denotes that
the channel is enabled, and 0 denotes that the
channel is disabled.
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command. An
invalid command is returned if an attempt is
made to enable a channel that is not present.
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
48 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA[CHKSUM](CR)