Aai - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.14 $AAI

Description:
Reads the INIT status of a module.
Syntax:
$AAI[CHKSUM](CR)
$ Delimiter character
AA Address of the module to be diagnosed (00 to FF)
I Command to read the module INIT status
Response:
Valid command:
Invalid command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
S INIT switch status of the module
0: The INIT switch is moved to the INIT
position
1: The INIT switch is moved to the Normal
position
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AAS[CHKSUM](CR)
59