Aaev - ICP DAS USA tM-TH8 User Manual

tM-TH8

2.21 ~AAEV

Description:
Enables/Disables the module calibration.
Syntax:
~AAEV[CHKSUM](CR)
~ Delimiter character
AA Address of the module to be enabled/disabled
(00 to FF)
E Command to enable/disable calibration
V 1: enable calibration
0: disable calibration
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
! Delimiter character for a valid command
? Delimiter character for an invalid command
AA Address of the responding module (00 to FF)
There will be no response if the command syntax is
incorrect, there is a communication error, or there is no
module with the specified address.
72 tM-TH8 User Manual, Rev: A1.1 7MH-018-A11
!AA[CHKSUM](CR)