Receiving - YASKAWA 1000 Series Technical Manual

Ac drive

Hide thumbs Also See for 1000 Series:

Table of Contents

3 Receiving

Receiving

Please perform the following tasks upon receiving the option:

• Inspect the option for damage. Contact the shipper immediately if the option appears damaged upon receipt.

• Verify receipt of the correct model by checking the model number printed on the option nameplate

(Refer to

Figure 2

on page

• Contact your supplier if you have received the wrong model or the option does not function properly.

Option Package Contents

Description:

Quantity:

Tools Required for Installation

• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the option.

• A straight-edge screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the option terminal block.

• A pair of diagonal cutting pliers.

• A small file or medium-grit sandpaper.

Note: Tools required to prepare option cables for wiring are not listed in this manual.

for more information).

Ground

Option

Wire

Screws (M3)

YASKAWA ELECTRIC SIEP C730600 43B 1000-Series Option SI-N3 Technical Manual

LED Label

Installation Manual

MANUAL

Table of Contents

Si-n3