YASKAWA 1000 Series Technical Manual page 12

Ac drive

Hide thumbs Also See for 1000 Series:

Table of Contents

5 Installation Procedure

Properly connect all pins and connectors.

Failure to comply may prevent proper operation and possibly damage equipment.

Check wiring to ensure that all connections are correct after installing the option and connecting any other

devices.

Failure to comply may result in damage to the option.

Prior to Installing the Option

Prior to installing the option, wire the drive, make the necessary connections to the drive terminals, and verify that the

drive functions normally. Refer to the Quick Start Guide packaged with the drive for information on wiring and

connecting the drive.

Figure 3

shows an exploded view of the drive with the option and related components for reference.

Figure 3

A – Insertion point for CN5

B – Option card

C – Front cover

D – Digital operator

E – LED label

F – Terminal cover

G – Removable tabs for wire

routing

Figure 3 Drive Components with Option

NOTICE

H – Included screws

I – Ground wire

J – Option terminal block

K – Drive grounding terminal (FE)

L – Connector CN5-A

M – Connector CN5-B

N – Connector CN5-C

YASKAWA ELECTRIC SIEP C730600 43B 1000-Series Option SI-N3 Technical Manual

Table of Contents

Si-n3