Receiving - YASKAWA 1000 Series Installation Manual

3

Receiving

Please perform the following tasks upon receiving the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the option
nameplate (Refer to
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Option Package Contents
Description:
X3
–
Quantity:
◆
Tools Required for Installation
• A Phillips screwdriver (M3 metric / #1, #2 U.S. standard size) is required to install the
option.
• A flat-blade screwdriver (blade depth: 0.4 mm, width: 2.5 mm) is required to wire the
option terminal block.
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: Tools required to prepare option cables for wiring are not listed in this manual.
YASKAWA ELECTRIC TOBP C730600 37C 1000-Series Option PG-X3 Installation Manual
Figure 1 on page
Option Ground Wires
PG-X3
1
10 for more information).
Screws (M3)
X3
2
3 Receiving
Installation Manual
MANUAL
3 1
9