YASKAWA 1000 Series Technical Manual page 64

10 General Class Objects
DeviceNet Connection Object - 5 (Class 0x05)
Services Supported
Service Code No. (hex)
Attributes Supported
Instance
Attribute
ID
0 1 Object Software Revision
1 State
2 Instance type
3 Transport class trigger
4 Produced connection ID
5 Consumed connection ID
Initial comm
6
characteristics
1
7 Produced connection size
Explicit
8 Consumed connection size Maximum number of bytes received.
9 Expected packet rate
12 Watchdog time-out action
Produced connection path
13
length
14 Produced connection path
Consumed connection
15
path length
Consumed connection
16
path
64
0E
10
Name
The DeviceNet Connection object software
revision
Status of the instance.
00: Network not found or not yet connected.
01: Online, awaiting connection from the
master.
02: Waiting to write the connection ID.
03: Connected successfully.
04: Timeout.
Shows the instance type.
00: Explicit message
01: I/O message
Defines behavior of the connection.
The label used in the comm. header for the
drive.
Set once the comm. connection is complete.
Code for the comm. type.
Maximum number of bytes that can be
transmitted.
The time to timeout after receiving a comm.
request. Rounds up to the nearest 10 ms.
Action taken after timeout.
00: Save value until reset or power is shut off
01: Auto delete
02: Restart while remaining connected
Number of bytes for the transmission
connection path.
Specifies the application object that will
produce data by this Connection Object.
Number of bytes in the consumed connection
path.
Specifies the Application Object that will
receive data consumed by this Connection
Object.
Description
YASKAWA ELECTRIC SIEP C730600 43B 1000-Series Option SI-N3 Technical Manual
Service Name
Get Attribute Single
Set Attribute Single
Get Set Size Range
– Word –
– Byte –
– Byte –
– Byte –
– Word –
– Word –
– Byte –
– Byte –
– Byte –
0 to
Word
65535
– Byte –
– Word –
– Array –
– Word –
– Array –
Default
1
3
0
83h
–
–
21h
–
–
0
1
0
–
0
–