Replacing And Storing The Ph Sensor - horiba TW-150 Instruction Manual

Storing a removed conductivity sensor

Refill the attached protective cap with pure water, and attach it to the sensor.
For details, see the operating manual for the sensor.
Note
Do not dry the conductivity sensor
7.4.5

Replacing and storing the pH sensor

1. Remove the connector from the pH sensor.
2. Turn the pH sensor to the right, and pull it out.
Note
The pH sensor top is made of glass. Take care not to break it when handling.
pH cell
pH sensor
Brown projection
Stop valve
must be closed.
7 MAINTENANCE
145