Setting The Hold Time - horiba TW-150 Instruction Manual

5 FUNCTION
5.5.5

Setting the HOLD TIME

[MAINTE.]
MEAS. screen
See "  Displaying the AUTO DRAIN SETTING screen" (page 87).
1. Press the HOLD TIME button on the AUTO DRAIN SETTING2/2 screen.
The OUTPUT HOLD TIME screen is displayed.
2. Enter the value of the output hold time using the numerical key pad, and press
[SET].
Input range: 0 to 9999 (min)
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the right-most number of the value.
Returns to the AUTO DRAIN SETTING screen.
90
[SETTING]
MAINTENANCE screen
HOLD TIME
[AUTO DRAIN SETTING]
SETTING1/2 screen
[x times]
AUTO DRAIN
SETTING