Checking Flow Rate - horiba TW-150 Instruction Manual

5.13.6 Checking flow rate

MEASUREMENT screen
See"  Displaying Data for an Item" (page 110).
1. Press [CHECK FLOW RATE] on the DATA 1/2 screen.
The CHECK FLOW RATE screen is displayed.
Tip
[RESET]: Resets the flow rate.
[FLOW]: Changes the flow rate setting.
Changing the flow rate setting

1. Press [FLOW].
The FLOW RATE SETTING screen is displayed.
2. Enter the new flow rate value using the numerical key pad and press [SET].
Input range: 0 mL/min to 200 mL/min
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the rightmost number of the value.
The screen returns to the maintenance information screen.
[DATA]
DATA screen
[CHECK FLOW RATE]
5 FUNCTION
117