Setting The Applied Voltage For Residual Chlorine; Setting The Range For Residual Chlorine - horiba TW-150 Instruction Manual

5.10.4 Setting the applied voltage for residual chlorine

[MAINTE.]
MEAS. screen
See "  Displaying the setting screens for each measurement item" (page 99).
1. Press the APPLIED VOLTAGE button on the FRC. MEAS. SETTING 2/2 screen.
The FRC. APPLIED VOLTAGE SETTING screen is displayed.
2. Enter the APPLIED VOLTAGE value using the numerical key pad and press [SET].
Input range: 450.0 mV to 450.0 mV

Applied voltage in using residual-chlorine sensor #3440-02C

Working electrode Applied voltage
Platinum
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the rightmost number of the value.
The display returns to the FRC. MEAS. SETTING screen.

5.10.5 Setting the range for residual chlorine

[MAINTE.]
MEAS. screen
See "  Displaying the setting screens for each measurement item" (page 99).
[MEAS. SETTING]
MAINTENANCE screen
APPLIED VOLTAGE
+50 mV
[MEAS. SETTING]
MAINTENANCE screen
[Residual chlorine]
MEAS.SETTING
screen
[xxx.x mV]
Difference
Working electrode color: silver
Working electrode
MEAS.SETTING
screen
FRC. MEAS.
SETTING screen
[FRC]
FRC. MEAS. SETTING
screen
5 FUNCTION
103