Table of Contents
Advertisement
5.5
Auto Draining
Auto draining is a function to regularly remove dirt from the measurement cell and tubes with
air bubbles and water draining so that measurements remain accurate.
The following are available for auto drain.
Setting
ON/OFF: AUTO DRAIN
（5.4.1, page 85）
DRAIN INTERVAL
（5.4.2, page 85）
STANDARD TIME
（5.4.3, page 86）
DRAIN TIME
（5.4.4, page 86）
Displaying the AUTO DRAIN SETTING screen
MEAS. screen
See " Displaying the maintenance item screen" (page 77).
1. Press [WASHING] on the SETTING 1/2 screen.
The AUTO DRAIN SETTING screen is displayed.
Turns auto drain ON or OFF
Set the interval to perform auto drain.
Set the time to start auto-washing. Starts the first auto drain at the
set time, and washing is subsequently performed at the interval
specified.
Set the frequency of the drain sequence.
[MAINTE.]
MAINTENANCE screen
[AUTO DRAIN SETTING]
Explanation
[SETTING]
SETTING1/2 screen
5 FUNCTION
Initial Setting
ON
60 minutes
2004/01/01/00:40
1 time
87
Advertisement
Table of Contents
