Table of Contents
Advertisement
5.12
Checking the Device Status
The following items can be checked.
TEMPERATURE
（5.12.1, page 107）
UNIT INFORMATION
（5.12.2, page 107）
Setting ID
（5.12.3, page 108）
Analog input check
（5.12.4, page 109）
Analog output check
（5.12.5, page 109）
5.12.1 Displaying the TEMPERATURE screen
MEAS. screen
See " Displaying the maintenance item screen" (page 77).
1. Press [TEMPERATURE] on the CHECK screen.
The TEMPERATURE screen is displayed.
The type of the temperature sensor and the temperature is displayed.
* The temperature sensors for conductivity (T3) and water temperature (T4) are optional.
5.12.2 Displaying the UNIT INFORMATION screen
MEAS. screen
See " Displaying the maintenance item screen" (page 77).
1. Press [UNIT INFORMATION] on the CHECK screen.
The UNIT INFORMATION screen is displayed.
The model number and ID information is displayed.
Check the value of each compensation temperature sensor.
Check the model and ID of the device.
The ID number is used when communicating over a serial connection, or in
the folder name of data transferred to the CF (CompactFlash) card.
Sets the ID to identify each device.
Check the value of analog input from each sensor. The value is used as a
target.
Check the value of analog output.
[MAINTE.]
MAINTENANCE screen
[TEMPERATURE]
[MAINTE.]
MAINTENANCE screen
[UNIT INFORMATION]
[CHECK]
CHECK screen
[CHECK]
CHECK screen
5 FUNCTION
107
Advertisement
Table of Contents
