Table of Contents
Advertisement
5 FUNCTION
5.6.1
Setting the SAMPLING CHECK
[MAINTE.]
MEAS. screen
See " Displaying the SAMPLING SETTING screen" (page 91).
1. Press the SAMPLING CHECK button on the SAMPLING SETTING screen.
The SAMPLING CHECK screen is displayed.
2. Select the settings using the buttons, and press [SET].
Setting
OFF
Sample water is not obtained.
ALARM ON
When an alarm for abnormal concentration occurs
EXT. I/O IN
When given a signal to obtain an abnormal-water sampling from the contact input or serial input
Returns to the SAMPLING SETTING screen.
5.6.2
Setting the SAMPLING TIME
[MAINTE.]
MEAS. screen
See " Displaying the SAMPLING SETTING screen" (page 91).
1. Press the SAMPLING TIME button on the SAMPLING SETTING screen.
The SAMPLING TIME SETTING screen is displayed.
2. Enter the value of the water sampling time using the numerical key pad, and press
[SET].
Input range: 5 to 99 (min)
Note
Based on the water sampling time, select a container that is large enough to hold sample water.
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the right most number of the value.
Returns to the SAMPLING SETTING screen.
92
[SETTING]
MAINTENANCE screen
SAMPLING CHECK
[OFF]
/[ALARM ON]
/[EXT. I/O IN]
[SETTING]
MAINTENANCE screen
SAMPLING TIME
[SAMPLING SETTING]
SETTING1/2 screen
Explanation
[SAMPLING SETTING]
SETTING1/2 screen
[xx min]
SAMPLING SETTING
SAMPLING SETTING
Advertisement
Table of Contents
