Table of Contents
Advertisement
5 FUNCTION
2. Select the items by using the buttons, and press [SET].
Item
Hold and output the last measured value.
If there is no last measured value when
HOLD
turning ON the power, the last value
measured before turning OFF the power is
held.
DIRECT
Outputs the actual measured value.
Output a set value.
PRESET
The log data will contain the value that is
equivalent to the set value.
Returns to the I/O SETTING screen.
Setting the PRESET value
1. Press [PRESET] in the lower-right portion of the screen.
The corresponding PRESET screen is displayed.
2. Enter the PRESET value using the numerical key pad and press [SET].
Input range: 0.0 mA to 21.0 mA
80
Explanation
[PRESET]
Initial Setting
MAINTE./SEQ./ALARM: 21.0 mA
WARMING UP: 4.0 mA
Advertisement
Table of Contents
