Setting The Range For Turbidity And Color - horiba TW-150 Instruction Manual

The screen returns to the COEFFICIENTS (a) SETTING screen for the appropriate
measurement item.
4. Press [b=x.xxx].
The COEFFICIENTS (b) SETTING screen for the appropriate measurement item is
displayed.
5. Enter the "b" value using the numerical key pad and press [SET].
Tip
[CLEAR]: Clears the whole value.
[BACK]: Deletes the rightmost number of the value.
The screen returns to the COEFFICIENTS (a) SETTING screen for the appropriate
measurement item.

5.10.2 Setting the range for turbidity and color

[MAINTE.]
MEAS. screen
See "  Displaying the setting screens for each measurement item" (page 99).
1. Press the RANGE button on the TURB. MEAS. SETTING 1/2 screen.
The TURB. RANGE screen is displayed.
2. Select the button with the desired range, and press [SET].
Returns to the TURB. MEAS. SETTING screen
Set the range for color the same way as for turbidity.
Measurement item
All measurement items
[MEAS. SETTING]
MAINTENANCE screen
[0-2]/[0-5]/[0-10]
Input range
0.100 to 9.999
MEAS.SETTING
screen
RANGE
[TURB.]
TURB. MEAS. SETTING
screen
5 FUNCTION
101