Table of Contents
Advertisement
5.13.1 Displaying the data history
MEASUREMENT screen
See " Displaying Data for an Item" (page 110).
1. Press [DATA HISTORY] on the DATA 1/2 screen.
The DATA HISTORY screen is displayed.
The data history time and measurement value of each item are displayed.
MIN.: Data for when the seconds on the clock were 00. Maximum amount of data:
Approx. 11 days
HOUR.: Data for when the minutes on the clock were 00. Maximum amount of data:
Approx. 13 months
The following mark is displayed in the data during each operation.
When operations overlap, mark 1 has the highest priority, 2 the next highest, and so on.
Tip
[Delete]: Deletes the data history.
[
] [
]: Changes the previous or next set of data.
[CHANGE]: Change the DATA HISTORY screen between MIN/HOUR.
[JUMP]: Displays the data at the specified time.
Displaying the data at a specific time
1. Press [JUMP].
The DATA/TIME (MIN/HOUR) screen is displayed.
2. Select the button to be changed, and select the numeric number with [
button. Input the time, then press [SET].
The DATA HISTORY screen that you specified is displayed.
[DATA]
DATA screen
[DATA HISTORY]
ACTION operation
Maintenance
Warming up
Alarm occurred
5 FUNCTION
] or [
]
111
Advertisement
Table of Contents
