6.3
Serial Input/Output (RS-232C)
This device includes an RS-232C input/output as a standard feature.
The specifications are as follows.
For details on items such as commands, contact HORIBA Advanced Techno.
JIS-C6361 Conformity
Transmission format
Baud rate:
Character length:
Parity:
Stop bit:
Communication method: Full duplex
Terminal type
There are the following two terminal types. Make sure to use only one type of terminal.
(You can not use two terminals at the same time.)
When using a terminal, the terminal assignments are as follows.
A transmission unit connector is used for connecting using the transmission unit option.
Note
You can not use a terminal and a connector for an interface unit at the same time. Use either a terminal
or a connector.
Cable specification
Device side (D-SUB 9 pin female connector) PC (D-SUB 9 pin female connector)
19200 bps
8 bit
None
1 bit
Name
Pin No.
CD
1
RD
2
SD
3
ER
4
SG
5
DR
6
RS
7
CS
8
9
Pin No.
Name
1
CD
2
RD
3
SD
4
ER
5
SG
6
DR
7
RS
8
CS
9
6 INPUT/OUTPUT
131