7.2
Stopping and Restarting Operation
Stopping operation
1. Close the stop valve.
2. Start the action for the water discharge operation.
Reference
"5.11 Action" (page 105)
Tip
If water is not discharged properly, run sample water again and repeat the procedure from step .
3. Turn off the power.
4. Open the inner door of the device.
Reference
"2.1 Opening the Inner Door of the Device" (page 7)
Restarting operation
1. Close the inner door of the device.
2. Operation starts.
Reference
"3.1 Starting the Device" (page 11)
Stop valve
must be closed.
7 MAINTENANCE
137