Setting Ext I/O In; Setting External Output During Operation - horiba TW-150 Instruction Manual

5.2.1

Setting EXT I/O IN

[MAINTE.]
MEAS. screen
See "  The I/O SETTING screen" (page 78).
1. Press the EXT I/O IN SETTING button on the I/O SETTING 1/2 screen.
The EXT. I/O IN SETTING screen is displayed.
2. Select the items by using the buttons, and press [SET].
Return to the I/O SETTING 1/2 screen.
5.2.2

Setting external output during operation

This section explains the following 4 output setting methods.
ALG. OUT (MAINTE.)

ALG. OUT (SEQ.)

ALG. OUT (ALARM)

WARMING UP

[MAINTE.]
MEAS. screen
See "  The I/O SETTING screen" (page 78).
1. Press the button for output item to configure on the I/O SETTING 1/2 screen.
ALG. OUT (MAINTE.)

ALG. OUT (SEQ.)

ALG. OUT (ALARM)

WARMING UP

The corresponding screen for each item is displayed.
* This example shows the screen for maintenance mode output.
[SETTING]
MAINTENANCE screen
Item
OFF Button operation only (No external input).
Contact Accept input using the contact connection.
SERIAL Accept input using the RS-232C connection.
[SETTING]
MAINTENANCE screen
[HOLD]
/[DIRECT]
/[PRESET xxmA]
SETTING1/2 screen
EXT. I/O IN
[OFF]
/[I/O]
/[SERIAL]
Explanation
SETTING1/2 screen
5 FUNCTION
[I/O]
I/O SETTING screen
[I/O]
I/O SETTING 1/2 screen
I/O SETTING 2/2 screen
[ ]
79