Tdt-3D Test Pattern; Thm-Video Thumbnails; Tmc-Thermal Management Control - Christie 4K35-RGB Technical Reference

TDT–3D Test Pattern
Enables or disables a 3D test pattern.
Only applies to: Models with the Mirage license applied
Commands
Command Description
TDT <0 | 1> Enables or disables the 3D test pattern.
Examples
Disable 3D test pattern:
(TDT 0)
Enable 3D test pattern:
(TDT 1)
THM–Video Thumbnails
Enables or disables the video thumbnails.
Commands
Command Description
THM <0 | 1> Enables or disables the video thumbnails.
Examples
Disable the video thumbnails:
(THM 0)
Enable the video thumbnails:
(THM 1)
TMC–Thermal Management Control
Selects the thermal (fan control) management strategy.
Use the fan control profile to balance noise compared to brightness depending on projection needs.
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
0 = Disables the 3D test pattern
1 = Enables the 3D test pattern
Values
0 = Turns off video thumbnails
1 = Turns on video thumbnails (Default)
61