Def-Factory Defaults - Christie 4K35-RGB Technical Reference

Command Description
CUC+HabX Sets the measured color reading along the line.
<measurement>
CUC+HabY Sets the measured color reading along the line.
<measurement>
CUC+SLCT <0 | 1 | Enables or disables color uniformity.
2>
Examples
Enable 1D color uniformity:
(CUC+SLCT 1)
Disable 1D color uniformity:
(CUC+SLCT 0)
Set the luminance value for red at point 2:
(CUC+H2RL 5322)
Set the x value for blue at point 5:
(CUC+H5BX 6798)
Set the y value for red at point 5:
(CUC+H5RY 3196)
Set the measured green values at point 5:
(CUC+H5GL 5322)
(CUC+H5GX 6798)
(CUC+H5GY 3196)
DEF–Factory Defaults
Resets Christie TruLife+ to its factory default values.
Note the following about this command:
• Resets the network settings to be DHCP enabled.
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
a = The point being measured (1
to 5)
b = The color being measured
(R/G/B)
measurement = The X
coordinate of the color value
a = The point being measured (1
to 5)
b = The color being measured
(R/G/B)
measurement = The Y
coordinate of the color value
0 = Disables 1D color uniformity
(Default)
1 = Enables 1D color uniformity
2 = Custom color uniformity
from file
24