Table of Contents
Advertisement
Command
Description
SIN <input>
Selects a set of inputs based on the selected port
configuration. This command is only available if video
electronics are on. (Saved value)
SIN+PORT <config>
Select an input port configuration to use. This command
is only available if video electronics are on. (Saved
value)
Examples
Use one port to display an image:
(SIN+PORT 1)
Use four SDI to display a Four-Port Quadrant image:
(SIN+PORT 4)
Result:
($SIN 1)
Try to select an unavailable input:
(SIN+PORT 4)
Result:
($SIN 4)
Display one-port input list:
(SIN+PORT 1)
(SIN?L)
Result:
(SIN!L001 000 0000 "None")
(SIN!L001 000 0001 "One-Port HDMI0")
(SIN!L001 000 0002 "One-Port HDMI1")
(SIN!L001 000 0003 "One-Port [HDBaseT]")
(SIN!L001 000 0004 "One-Port DP0")
(SIN!L001 000 0005 "One-Port DP1")
(SIN!L001 000 0006 "One-Port SDI0")
(SIN!L001 000 0007 "One-Port SDI1")
(SIN!L001 000 0008 "One-Port SDI2")
(SIN!L001 000 0009 "One-Port SDI3")
(SIN!L001 000 00010 "Christie Link [A]")
(SIN!L001 000 00011 "Christie Link [B]")
(SIN!L111 "--END--")
Display one-port dual-input 3D list:
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
input = Subject to the range
returned in SIN?L
1 = One-Port (Default)
2 = Two-Port
4 = Four-Port Quadrants
5 = One-Port, Dual-Input 3D—
Applies to models with Mirage
license only
52
Advertisement
Table of Contents
