Bdr-Baud Rate - Christie 4K35-RGB Technical Reference

Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the on
state. (Saved value)
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
Related information
PWR–Power (on page 49)
BDR–Baud Rate
Sets the baud rate for a serial communications port.
Commands
Command Description
BDR+PRTA? Returns the baud rate for the RS232-IN
port. (Read-only)
BDR+PRTA <value> Sets the baud rate for the RS232-IN port.
This command requires service level access.
(Saved value)
Examples
Verify RS232-IN is set to 115200 bits per second:
(BDR+PRTA?)
Result:
(BDR+PRTA!006 "115200")
Set the baud rate on port A to 115200 bits per second:
(BDR+PRTA 6)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
0 = Disables auto power up
1 = Enables auto power up
Values
—
1 = 2400
2 = 9600
3 = 19200
4 = 38400
5 = 57600
6 = 115200 (Default)
16