Table of Contents
Advertisement
VERSION 03/2018
When using a second automatic gun, the following needs to be considered:
Grounding
– Grounding the product hoses (5) is safeguarded with the knurled nut (4) over the assembly
sheet metals (12).
Assembly
– Additionally a product distribution piece (14), order number 2359038, is needed on the
cabinet side.
– Control air (28) red and atomizer air (27) blue are supplied externally and separately to
the automatic spray guns. Additionally for the GA 5000EAWEC the shaping air (29) is
fed externally.
– Both ends of the product hose must be stripped. On the gun side within the cover to a
length of approx. 150 mm; 5.9 inches. In the cabinet starting from the cabinet entrance
(see figure below).
– Gun side: Clean thread and stripped parts of product hoses (5). Grease thread with
Vaseline (16).
Mounting materials
Order No.
16 *
9992698
* Use Vaseline sparingly
View from top
12
Product hose to gun 1
4
Product hose to gun 2
ORDER NUMBER DOC 2369735
Description
Vaseline white, PHHV II
12
B_02903
Stripped hose
to distribution piece (14)
Grounding point
to distribution piece (14)
Stripped hose
45
Advertisement
Table of Contents
