Safety; Safety Information; Responsibilities; Meter Operator Code Of Practice - Landis+Gyr E470 Series User Manual

Safety

1 Safety
1.1

Safety information


1.2

Responsibilities

1.3

Meter Operator Code of Practice

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
The following symbols are used to draw your attention to the relevant danger
level, i.e. the severity and probability of any danger, in the individual sections
of this document.
Danger
This symbol is used to indicate a possible dangerous situation which could
result in severe physical injury or death.
Warning
This symbol is used to indicate a possible dangerous situation which could
result in minor physical injury or material damage.
Note
This symbol is used to indicate general details and other useful information.
In addition to the danger level, safety information also describes the type
and source of the danger, its possible consequences, and measures for
avoiding the danger.
The owner of the meters – usually the utility company – is responsible for
assuring that all persons engaged in working with meters:

Have read and understood the relevant sections of the user manual.

Are appropriately qualified for the work to be performed.

Strictly observe the safety regulations (laid down in section 1.4) and
the operating instructions as specified in the individual sections.
The owner of the meters bears responsibility for the protection of persons,
prevention of material damage and the training of personnel.
For this purpose, Landis+Gyr provides training on a variety of products and
solutions. Contact your local Landis+Gyr representative for more information.
The E470 must be installed in accordance with the Meter Operation Code
of Practice Agreement (MOCOPA®), defining safety, technical and
business interface requirements regarding the provision of meter operation
services.
For more information see https://www.mocopa.org.uk/.
9/143
© Landis+Gyr