Landis+Gyr E470 Series User Manual page 54

54/143
Navigate to
2
HAN? Menu
item
Select HAN?
3
option
Choose leave
4
HAN option
Check
5 Commissioned
Status
Meter returns
6
to top of
Service Menu
Exit Service
7
Mode
6.5.4.3 Active Tariff Price
Step Step entry
number action
Access the
1 credit mode
status display
© Landis+Gyr
Press button A briefly (< 2 s) to
show the HAN? menu item
Press button B briefly (<2 s) to
select the HAN option
Press button B longer (< 2 s) to
select the Leave HAN option. The
(c) commissioned indicator will
appear if the meter has been
previously and properly
commissioned.
The installation agent can
determine if the meter has been
properly commissioned by check
for the presence of a lower case 'c'
in brackets in the bottom right
hand corner of the display.
NB: This symbol is displayed on
the meter when it has
successfully synchronised
clocks with the comms hub
After 3 seconds the meter will
return to the top of the Customer
Menu to show the first item which
is "IST?".
The meter will automatically
timeout and return to the total
active import display after 5
minutes.
Note that the following sequence does not include any dialogues
associated with entering the Privacy PIN on the meter as it is assumed that
the privacy pin will not have been set immediately following device
installation and commissioning. The all test display has also been omitted
although it may be shown depending on the status of the display and
previous button presses.
Step Description
The normal default display of Total
Active Import should be displayed
on the meter.
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
H A N ?
L e a v e H A N ?
H A N L e a v i n g . .
H A N L e f t O K
I S T ?
T o t a l A c t I m p o r t
Display
R a t e
import
Installation and Commissioning
A = N o
B = y e s
A = N o
B = Y e s
( c )
( c )
A = N o
B = Y e s
0 0 0 0 0
kWh
X X A c t I m p
0 0 0 0 0
kWh