Configuration; Introduction; Default Hardware Configuration; Default Software Configuration - Landis+Gyr E470 Series User Manual

64/143
9

Configuration

9.1

Introduction


9.2

Default hardware configuration

9.3

Default software configuration

Configuration
item
Decimal Point How meter readings are displayed
Configuration on the meter's display in terms of
the number of digits displayed
before and after the decimal point
Privacy PIN A four-digit number used by the
Protection consumer to enable temporary
access to a specified set of display
items and commands via the
meter's user interface.
UK Standard Specifies the DST settings that are
DST settings used by the meter for generating
local time.
© Landis+Gyr
The configuration defines the functional range of the meter as well as the
physical hardware.
For the E470 SMETS2 meter a standardised default configuration is used
for all customers. Only the following features can be specified by the
customer at order time using the corresponding order document:

Firmware version (if not the latest issue)

Laser etched property information on faceplate
Part of configuration can be altered in the field
Certain items are remotely configurable via the DCC.
The E470 SMETS2 meter has the following default hardware configuration:

Accuracy: Class 1 (IEC) B (MID), for active energy; Class 2 (IEC) for
reactive energy

Voltage range: 1 x 230 V

Current Ibase (Imax): 20 (100) A

Measured quantities active or reactive: bidirectional, 4Q reactive
energy

Voltage inscription on faceplate: 230 V

Current inscription on faceplate: 1-20 (100) A.

Terminal cover screws: Posi-drive combi
The E470 SMETS2 meter has the following default software configuration:
Description
Display Settings
Daylight Saving Time Settings
D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
Default
configuration
5 digits before
the decimal
point and 0
after
Disabled
UK Standard
DST settings
are used.
Configuration
Unit / Type Remotely
configurable
No. of most No
significant
digits/No of least
significant digits
Enabled/ Yes (PIN
protection
Disabled
can be
disabled
remotely)
UK Standard No
DST settings
via DCC