Repairing The Meter - Landis+Gyr E470 Series User Manual

Measures in the event of faults
26.4

Repairing the meter

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
There are no user serviceable parts inside the meter. Breaking factory
calibration seals will invalidate the calibration status of the meter. In the
event of a meter requiring repair, proceed as follows.

Remove the meter from the installation

Attach a label, which describes the fault as accurately as possible, to
the meter and include name and contact details of person responsible
in case of inquiries.

Package the meter to ensure no further damage can occur during
transit.

Send the meter back to Landis+Gyr for refurbishment or repair.
137/143
© Landis+Gyr