Credit Top Ups; Manual Entry Of A Credit Top Up Code - Landis+Gyr E470 Series User Manual

Prepayment functionality
10.4

Credit top ups

10.5

Manual entry of a credit top up code

D000058620 en a – E470 Series 3 SMETS2 100 mm – ZCX310 – User Manual and Functional Description
Issue 1.2
The total of these values will be the minimum amount to repay to set the
meter balance to zero.
In the case of payment based debt to be collected, it is based on the listed
items and takes account of the amount remaining in the Payment Debt
Register, the payment-based debt payments in the Billing Data Log and the
Debt Recovery Rate Cap.
Users must purchase credit top ups to maintain a positive meter balance.
Top ups may be purchased through several channels and will generally be
delivered to the meter using the secure WAN and HAN networks.
In the event of HAN or WAN outage preventing the top up from being
automatically received by the meter the user may enter the top up code (20
digits) directly into the meter using the two push buttons.
Top ups that have been accepted by the meter previously will not be
accepted a second time. An event will be logged in the meter.
If only the WAN is unavailable then the meter is able to accept credit top
ups via an authorised Prepayment Interface Device (PPMID) as long as the
HAN is available.
Credit top up codes are 20 decimal digits and, as a fall back option, may be
entered manually into the meter using the two buttons on the meter face
plate. This process is detailed in Figure 17.
71/143
© Landis+Gyr